NeverBlaze Coating System – Fine Textured Finish
A Fine Textured high-performance nano-ceramic coating, which will not burn off under direct flame.
Description
Military Grade NeverBlaze™ Nano Ceramic Fire Resistant Coatings, used for structural applications in fireproofing buildings, utilities, equipment, protecting valuable assets and vulnerable livestock. It ambient cures, for interior and exterior use, a waterproof top coat is required for this formulation; we suggest the BZ600 series 2-K paints. When appropriately applied, Never Blaze can encapsulate most other stable materials. It has excellent adhesion properties to wood, steel, drywall, aluminum, and most common substrates*.
Never Blaze™ is a non-conductive, highly insulative material, and it inhibits warping and other structural damage. It is non-flammable, will not burn under direct flame contact, has no flame spread, and no toxic smoke/fumes are generated. The material is inert, non-toxic, and provides excellent sound attenuation (soundproofing) properties, lending its application to be used between hotel suites.
Never Blaze™ can be applied by brush, roller, trowel, or similar application tools, as well as texture spray gun systems. It’s simple, safe, and easy to clean up with water while still wet.
Never Blaze™ may be applied in layers** to create a higher film build; it will not settle, crack, or haze and has a slight flex to allow it to be applied to wood and metal substrates. In addition, it is free from chemical flame retardants, non-corrosive, water-based, nano-ceramic, completely non-combustible.
TDS
Drying and Coverage Rates
Drying and Coverage Rates
Technical Properties
Color _________________________ Speckled brown (may vary) – Color versions available soon.
Percent of Solids _________________Approximately 75%
RoHS _Compliant
REACH _Compliant
Halogens _None
Odor __________________________No odor once cured
VOC __________________________None
Theoretical coverage at 5-mil layer __200-250 sq/ft/gal on a smooth surface
Flashpoint _____________________ n/a
Flame contact __________________non-flammable & self-extinguishing
Dry time – dependent on product thickness, ambient temperature, and humidity, as the product’s applied mil thickness increases, it will extend the required time to cure the product.
*It is recommended to test the coating on difficult substrates to ensure proper bonding. For some hard to bond to substrates, the use of BX520HT adhesion primer may be required.
**Multiple-layered application: the preceding NeverBlaze coating layer should be cured prior to overcoating with a new coating of NeverBlaze.
Product Enquiry
Product Enquiry
NeverBlaze Coating System – Fine Textured Finish
$0.00